Pre-fabricated waterproofing membrane for specific use as a total barrier to the passage of vapour. The waterproofing mass is made of distilled bitumen and elastoplastic polymers (APP), reinforced with a rot proof fibre glass reinforcement and aluminium film which allows to obtain a barrier to the transmission of vapour. Due to the characteristics, the membranes of the MAXITEC VAPOUR BARRIER range are used with success in the waterproofing of both civil and industrial works where required, with the use of thermal insulation, as an absolute barrier to the transmission of water vapour. In the stratification of the roof, the MAXITEC VAPOUR BARRIER must be positioned under the insulation, in order to preserve it from phenomena’s of water vapour condensation, which surely occurs, with the excursion changes of the thermal conditions of the roof.
Pre-fabricated waterproofing membrane with the specific function of an absolute vapour barrier. The compound is made of distilled bitumen and elasto-Plastomers (APP type), reinforced with a rot-proof fiberglass mat and aluminium metal sheet that allows to obtain a barrier against the passage of vapour. The DIMPLED FACED VAPOUR BARRIER MEMBRANE on the exposed side features a series of embossed dimples (more than 1000 per m2), formed by a special heat activated compound which ensures a strong and durable adhesion to the insulating panels. The advantages of the DIMPLED FACED VAPOUR BARRIER MEMBRANES are basically those aimed at avoiding the use of oxidized bitumen and cold bonding substances (mastic, polyurethane glues) for the application and adhesion of insulating panels. The hot oxidised bitumen, in addition to being extremely dangerous (burns, fumes, etc.), loses in little time its adhesive capacity, exposing the covering to the known dangers due to the strength of persisting wind action and the deformations of the roof covering. In addition, the embossed dimples allow to smooth out any unevenness of the support (more compound on the side where the insulating is applied) ensuring perfect adhesion on the entire surface of the insulating panel.
Pre-fabricated waterproofing membrane with the specific function of acting as an extremely effective shield against vapour passage. The compound is made of distilled bitumen and elasto-Plastomers (APP type), reinforced with a rot-proof fiberglass mat. The DIMPLED FACED VAPOUR SHIELD MEMBRANE on the exposed side features a series of embossed dimples (more than 1000 per m2), formed by a special heat activated compound which ensures a strong and durable adhesion to the insulating panels. The advantages of the DIMPLED FACED VAPOUR SHIELD MEMBRANES are basically those aimed at avoiding the use of oxidized bitumen and cold bonding substances (mastic, polyurethane glues) for the application and adhesion of insulating panels. The hot oxidised bitumen, in addition to being extremely dangerous (burns, fumes, etc.), loses in little time its adhesive capacity, exposing the covering to the known dangers due to the strength of persisting wind action and the deformations of the roof covering. In addition, the embossed dimples allow to smooth out any unevenness of the support (more compound on the side where the insulating is applied) ensuring perfect adhesion on the entire surface of the insulating panel.
Prefabricated thermal activated composite waterproofing membrane, composed of distilled bitumen and special synthesis polymers, which provide thermal adhesion properties to the lower face waterproofing compound. The waterproofing compound of the upper face allows for fast heat transmission to the lower face. The thermal activated waterproofing compound allows the product to be positioned and applied without the initial use of heat and is particularly indicated for those surfaces where the use of direct open flame is not suggested. PLURA THERMO AD VAPOUR BARRIER is conceived specifically to adhere insulation panels to various types of substrates, providing total adhesion.
Pre-fabricated composite waterproofing membrane. The compound is made of distilled bitumen and elastomers (SBS type), reinforced with fiberglass and aluminium metal sheet that allows to obtain a barrier against the passage of vapour. The PLURA ZEBRA VAPOUR BARRIER membrane on the exposed side features a series of stripes formed by a special heat activated compound, separated by fine sand, which ensures a strong and durable adhesion to the insulating panels. The advantages of the PLURA ZEBRA VAPOUR BARRIER are basically those aimed at avoiding the use of oxidized bitumen and cold bonding substances (mastic, polyurethane glues, etc.) for the application and adhesion of insulating panels. The hot oxidized bitumen, in addition to being extremely dangerous (burns, fumes, etc.), loses in little time its adhesive capacity, exposing the covering to the known dangers due to the strength of persisting wind action and the deformations of the roof covering. In addition, the stripes ensures perfect adhesion on the entire surface of the insulating panel. In case of application on roofs with slopes higher than 15% or in a particularly windy area, it is necessary to integrate the bonding with suitable mechanical fasteners and/or strips inside in the stratigraphy. Particularly suitable for high thickness panels and/or sloped.
PLURA SELF-ADHESIVE ZERO V.B. are pre-fabricated waterproofing membrane for specific use as a total barrier to the passage of vapour. PLURA SELF-ADHESIVE ZERO V.B. has a continuous single strand composite woven non woven polyester reinforcement with high mechanical characteristics and an aluminium film which allows to obtain a barrier to the transmission of vapour. The lower face of PLURA SELF-ADHESIVE V.B. is protected with a removable silicon release film. The upper face is self protected with micro mineral slates that offer good walkability and improve grip of TECA adhesives (Millennium One Step, Pratiko Mastic, Bit Adhesive, etc.) for the adhesion of insulating panels; furthermore a removable side selvedge of 10 cm is foreseen. In the stratigraphy of the roof, PLURA AUTOADESIVO ZERO V.B. must be applied under the insulating panel, in order to preserve the latter from the condensation phenomena of water vapor, which certainly occurs, as the roof operating conditions change. PLURA SELF-ADHESIVE ZERO V.B. is an innovative self-adhesive with increased adhesiveness, enhanced resistance of the adhesion to aging and the cold (the product maintain good adhesion even at low temperatures).
